show access-list dynamic counter

show access-list dynamic counter {{countername} any | {countername} ports port_list | {countername} vlan vlan_name} {ingress | egress}

Description

Displays the dynamic ACL (Access Control List) counters.

`countername`	Display the counter.
any	Specifies the wildcard ACL.
`port_list`	Specifies which ports‘ ACLs to display.
`vlan_name`	Specifies which VLAN (Virtual LAN)‘s ACL to display.
ingress	Display ingress ACLs.
egress	Display egress ACLs.

The default is to display all interfaces, ingress.

None.

The following command displays all the dynamic ACL counters:

show access-list dynamic counter

This command was first available in ExtremeXOS 11.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next