Configures the LLDP (Link Layer Discovery Protocol) port to advertise or not advertise MAC and physical layer capabilities to its neighbors. The capabilities include duplex and bit rate.
| all | Specifies all ports on the switch. |
| port_list | Specifies one or more ports or slots and ports. |
| advertise | Specifies to send the information to neighbors. |
| no-advertise | Specifies not to send the information to neighbors. |
No advertise.
When configured, the system advertises information about the speed capabilities, as well as autonegotiation support and status, of the LLDP port.
The following command configures all ports to advertise MAC/PHY capabilities to neighbors:
configure lldp ports all advertise vendor-specific dot3 mac-phy
This command was first available in ExtremeXOS 11.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB