Unconfigures the current hop limit value sent in router discovery advertisements on the VLAN (Virtual LAN).
| vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
This command sets the hop-limit parameter to the default value of 64.
The following example unconfigures the current hop limit for the VLAN "top_floor":
unconfigure vlan top_floor router-discovery hop-limit
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.4 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB