Displays the specified access list counters.
| countername | Specifies the ACL (Access Control List) counter to display. |
| port_list | Specifies to display the counters on these ports. |
| vlan_name | Specifies to display the counters on the VLAN (Virtual LAN). |
| ingress | Specifies to display ingress counters. |
| egress | Specifies to display egress counters. |
The default direction is ingress.
Use this command to display the ACL counters.
The following example displays all the counters for all ACLs:
show access-list counter
This command was first available in ExtremeXOS 10.1.
The egress option was first available in ExtremeXOS 11.3.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB