show snmp traps configuration

Description

Shows the current state of whether SNMP (Simple Network Management Protocol) traps are set to occur when switch configurations are changed/saved.

N/A

The following example shows whether SNMP traps are set to occur when switch configurations are changed/saved:

# show snmp traps configuration

SNMP Traps for configuration change          : Disabled
SNMP Traps for configuration save            : Enabled

This command was first available in ExtremeXOS 22.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches..

Published December 2017prev | next