configure vlan delete nsi | isid

configure [{vlan} vlan_name |vlan vlan_id] delete [nsi nsi | isid isid]

Description

Unmaps a static VLAN from a Network Service Identifier (NSI) or Individual Service Identifier (ISID).

vlan	Specifies VLAN.
`vlan_name`	Specifies the name of the VLAN to remove.
`vlan_id`	Specifies the ID of the VLAN to remove.
delete	Specifies removing the mapping of a VLAN from an NSI.
nsi	Specifies an NSI.
`nsi`	Specifies the ID number of the NSI to unmap from the VLAN.
isid	Specifies an ISID.
`isid`	Specifies the ID number of the ISID to unmap from the VLAN.

N/A.

Only mappings created by the command configure vlan add nsi | isid can be removed using this command.

The following example removes VLAN "vlan1" from NSI "1000":

# configure vlan vlan1 delete nsi 1000

This command was first available in ExtremeXOS 22.4.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next