configure cfm domain md-level

configure cfm domain domain_name md-level level

Description

Changes a previously configured MD level for the specified domain.

`domain_name`	Enter the name of the domain for which you want to change the MD level.
`level`	Specifies the new MD level you are assigning to this domain. Enter a value between 0 and 7.

N/A.

You can have up to 8 domains on a switch, and each one must have a unique MD level. Thus, a given MD level exists only once one a switch.

The IEEE standard 801.2ag specifies different levels for different network users, as follows:

The following command changes the MD level of a previously created domain extreme to 2:

configure cfm domain extreme md-level 2

This command was first available in ExtremeXOS 11.4.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next