show vrrp group

show vrrp group group_name

Description

This command shows VRRP (Virtual Router Redundancy Protocol) group status.

Syntax Description

group Form a group of VRRP VRs to operate in high-scale mode.
group_name Specifies the VRRP group name.

Default

None.

Example

The following example shows VRRP group information for group "ExtremeNet":

show vrrp group ExtremeNet
Group Name: ExtremeNet        Group Status : Enabled 

                      Virtual                  Master  
   VLAN Name VRID Pri IP Address        State  MAC Address      TP/TR/TV/P/T     /FR 
Primary-VR:  
      v1(En) 0001 225 100.0.0.100        MSTR  00:00:5e:00:01:01 0  0  0 Y  1      Y
Secondary-VR(s): 
     v10(En) 0001 225 100.10.0.100       MSTR  00:00:5e:00:01:01 0  0  0 N 40      Y
     v11(En) 0001 200 100.11.0.100       MSTR  00:00:5e:00:01:01 0  0  0 N 40      Y

  En-Enabled, Ds-Disabled, Pri-Priority, T-Advert Timer, P-Preempt,  
  TP-Tracked Pings, TR-Tracked Routes, TV-Tracked VLANs, FR- Fabric Routing 

Total number of member VRs of group : 3

History

This command was first available in ExtremeXOS 22.2.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the VRRP feature, see the ExtremeXOS 22.4 Feature License Requirements document.