Creates a DHCP (Dynamic Host Configuration Protocol) binding.
| ip_address | Specifies the IP address for the DHCP binding. |
| mac_address | Specifies the MAC address for the DHCP binding. |
| vlan_name | Specifies the name of the VLAN (Virtual LAN) for the DHCP binding. |
| server_port | Specifies the server port for the DHCP binding. |
| client_port | Specifies the client port for the DHCP binding. |
| seconds | Specifies the number of seconds for the lease. |
N/A.
This commands allows you to add a DHCP binding in order to re-create the bindings after reboot and to allow IP Security features to work with clients having static IP addresses.
Note
Setting the lease-time to 0 causes the DHCP binding to be static; in other words, it is not aged-out if no DHCP renew occurs. This is for use with clients using static IP addresses.
This command was first available in ExtremeXOS 12.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB