Displays WRED configuration data for the specified ports or all ports.
| port_list | Specifies a list of slots and ports to display. Specify ports in the following formats: 3-5, 2:5, 2:6-2:8. |
| all | Specifies that this command applies to all ports on the device. |
N/A.
If no port or port list is specified, this command displays the default WRED configuration values.
# show wredprofile ports 2 Port: 2 WRED configuration parameters ================================================================ QoS Packet Min Max Max Avg. Profile Type Color Thresh Thresh Drop-Rate Weight ECN ================================================================ QP1 TCP Green 100% 100% 100% 4% Off QP1 TCP Red 100% 100% 100% 4% Off QP1 non-TCP Any 100% 100% 100% 4% Off QP1 non-TCP Red 100% 100% 100% 4% Off QP5 TCP Green 100% 100% 100% 5% On QP5 TCP Red 100% 100% 100% 5% On QP5 non-TCP Any 100% 100% 100% 5% On QP5 non-TCP Red 100% 100% 100% 5% On QP8 TCP Green 100% 100% 100% 4% Off
This command was first available in ExtremeXOS 12.7.
ECN column added in ExtremeXOS 22.3.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X970, X620, X690 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB