Enables gPTP on one or more ports.
| port_list | Specifies one or more of the switch‘s physical ports. |
| only |
Apply change only to specified port, even if port is master of a load sharing group. |
| all | Specifies all of the switch‘s physical ports. |
Disabled.
Use this command to configure on which ports gPTP runs. gPTP does not run on any ports if it is not first enabled in the switch by the enable network-clock gptp command.
enable network-clock gptp ports 4
This command was first available in ExtremeXOS 15.3.
This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch..
Print
this page
Email this topic
Feedback
View PDF
Download EPUB