show msdp

show msdp {vr vrname}

Description

This command displays global configuration and run-time parameters for MSDP (Multicast Source Discovery Protocol).

Syntax Description

vrname Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context.

Default

N/A.

Usage Guidelines

Use this command to verify the global configuration parameters of MSDP.

Example

The following command displays global configuration and run-time parameters for MSDP:

Switch.2 # show msdp
MSDP Enabled         : No                  VR-Name              : VR-Default
Originator RP Addr   : not configured      SA Cache ageout time : 360
Store SA Cache       : Yes                 SA Cache Server      : not configured
Export Local SAs     : Yes                 Export SA filter     : not configured
Max Rejected Cache   : not configured      Encapsulate data     : Yes
Num of Rejected SAs  : 0                   Total Num of SAs     : 0
Num of Local SAs     : 0                   AS Disp Format       : Asdot

History

This command was first available in ExtremeXOS 12.0.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the MSDP feature, see the ExtremeXOS 22.4 Feature License Requirements document.