configure stpd trap new-root

configure stpd stpd_name trap new-root [on | off]

Description

Enables and disables the new-root trap.

`stpd_name`	Specifies an STPD (Spanning Tree Domain) name on the switch.
on	Enables the new-root trap.
off	Disables the new-root trap.

By default, the trap is enabled (on).

The new-root trap is sent when the new root bridge is elected.

The following example disables the new-root trap for the STP (Spanning Tree Protocol) domain r1.

configure stpd r1 trap new-root off

This command was first available in ExtremeXOS 15.7.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next