configure mld snooping vlan ports delete static group

configure mld snooping {vlan} vlan_name ports port_list delete static group [all | v6grpipaddress]

Description

Removes the configuration that causes VLAN (Virtual LAN) ports to receive the traffic from a multicast group, even if no MLD joins have been received on the port.

Syntax Description

vlan_name Specifies a VLAN name.
port_list Specifies one or more ports or slots and ports. On a modular switch, it can be a list of slots and ports. On a standalone switch, it can be one or more port numbers. In the form 1, 2, 3-5, 2:5, 2:6-2:8.
all Specifies all multicast groups.
v6grpipaddress Specifies the multicast group IPv6 address.

Default

N/A.

Usage Guidelines

Use this command to delete a static group from a particular VLAN port.

To add a static group, use the following command:

configure mld snooping {vlan} vlan_name portsport_list add static groupv6grpipaddress

Example

The following example removes a static MLD entry so the multicast group ff02::a:b is not forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join message is received on the port:

configure mld snooping marketing ports 2:1-2:4 delete static group ff02::a:b

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the platforms listed for the IPv6 multicast routing feature in the ExtremeXOS 22.4 Feature License Requirements document.