disable lldp ports

disable lldp ports [all | port_list] {receive-only | transmit-only}

Description

Disables LLDP (Link Layer Discovery Protocol) transmit mode, receive mode, or transmit and receive mode on the specified port or ports.

all	Specifies all ports on the switch.
`port_list`	Specifies one or more ports or slots and ports.
receive-only	Specifies that only the receive mode for LLDP is disabled.
transmit-only	Specifies that only the transmit mode for LLDP is disabled.

Enabled.

If you do not specify an option, both LLDP modes (transmit and receive) are disabled.

The following example disables the LLDP receive mode on ports 1:2 to 1:6.

disable lldp ports 1:2-1:6 receive-only

This command was first available in ExtremeXOS 11.2.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next