show vlan fabric attach mappingsDisplays VLAN to Network Service Identifier (NSI) information.
| vlan | Specifies VLAN. |
| vlan_name | Specifies the name of the VLAN to show NSI information about. |
| vlan_id | Specifies the ID of the VLAN to show NSI information about. |
Not specifying a VLAN shows all VLAN to NSI mapping information.
When a mapping is first received by the proxy, it is marked as "Pending". Mappings that are sent to the FA server are updated with the status returned by the server; either "Active" or "Rejected".
The following example shows all VLAN to NSI mapping information:
# show vlan fabric attach mappings VLAN VLAN Name Type ISID/NSI Status ---- -------------------------------- ------- -------- -------- 4012 NSI_4012Salem Dynamic 4012 Active 10 NSI-31247Salem Static 31247 Pending 1234 NSI-1234-SanJose Dynamic 1234 Rejected 1012 NSI-101010_RDU Static 101010 Active
This command was first available in ExtremeXOS 22.4.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB