enable udp-echo-server

enable udp-echo-server {vr vrid}{udp-port port}

Description

Enables UDP echo server support.

`vrid`	Specifies the VR or VRF.
`port`	Specifies the UDP port.

Disabled.

UDP echo packets are used to measure the transit time for data between the transmitting and receiving ends.

The following example enables UDP echo server support:

enable udp-echo-server

This command was first available in ExtremeXOS 11.0.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next