debug openflow

debug openflow {on | off | {on} {{{verbosity verbosity} {output output_file}} | {{output output_file} {verbosity verbosity}}}}

Description

Captures OpenFlow protocol packets for analysis.

on	Turn debug on.
off	Turn debug off.
verbosity	Verbosity of output.
output	Output packet capture information to a file.
`output_file`	Output filename.
`verbosity`	0 (default) is the least detailed, 5 is the most detailed.

0 is the default value for verbosity.

Use this command to decode OpenFlow protocol packets sent to and from the connected OpenFlow controllers for analysis.

The following example turns debugging off:

debug openflow off

This command was first available in ExtremeXOS 15.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next