The following table describes the secure and nonsecure protocols that the switch supports.
|
Nonsecure protocols |
Default status |
Equivalent secure protocols |
Default status |
|---|---|---|---|
|
FTP and Trivial FTP |
Disabled |
Secure Copy (SCP) and Secure File Transfer Protocol (SFTP) |
Disabled |
|
Note:
File Transfer Protocol (FTP) and Trivial File Transfer Protocol (TFTP) support both IPv4 and IPv6 addresses, with no difference in functionality or configuration. |
|||
|
Telnet |
Disabled |
Secure Shell version 2 (SSHv2) |
Disabled |
|
SNMPv1, SNMPv2 |
Enabled |
SNMPv3 |
Enabled |
|
rlogin Note:
Exception: only supported only on VSP 8600 Series. |
Disabled |
SSHv2 |
Disabled |
|
HTTP |
Disabled |
HTTPS Important:
Take the appropriate security precautions within the network if you use HTTP. You must use the web-server enable command in CLI before you can access EDM. |
Enabled |