View Fabric Attach Global Configuration Status

Use this procedure to display the Fabric Attach global configuration status on a switch.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the FA configuration status using one of the following commands:

    • show fa

    • show fa agent

Example

Sample output for the show fa command:

Switch:1>show fa

================================================================================
                          Fabric Attach Configuration
================================================================================
                            FA Service : enabled
                       FA Element Type : server
                 FA Assignment Timeout : 240
                  FA Discovery Timeout : 240
                     FA Provision Mode : spbm

Sample output for the show fa agent command: 

Switch:1>show fa agent

================================================================================
                          Fabric Attach Configuration
================================================================================
                            FA Service : enabled
                       FA Element Type : server
                 FA Assignment Timeout : 240
                  FA Discovery Timeout : 240
                     FA Provision Mode : spbm
9036843-01 Rev AD