Run a VM command from VOSS CLI

About this task

Perform this task to run the ls command for the VM configs directory from the VOSS CLI.

1. Enter Global Configuration mode:

   enable

   configure terminal

2. Run a VM command from VOSS:

   virtual-service WORD<1-128> exec-command WORD<1-256>

Example

From VOSS, list the contents of the home/rwa/configs directory in the Fabric IPsec Gateway VM.

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch:1(config)#virtual-service figw exec-command "ls /home/rwa/configs"
config.cfg
figw_cli.log
shadov.txt