View ACE Statistics

View ACE statistics to ensure that the filter operates correctly.

Note

The ACL statistics do not support security action on some hardware platforms.

Procedure

Enter Privileged EXEC mode:

enable
View ACE statistics for a specific ACL, ACE, or ACE type:

show filter acl statistics <acl-id> <ace-id> [qos] [security]
View all ACE statistics:

show filter acl statistics all
View default ACE statistics:

show filter acl statistics default [<acl-id>]
View global statistics for ACEs:

show filter acl statistics global [<acl-id>]

Example

View ACE statistics:

Note

Based on your hardware platform, the output may display all the ACL packets or segregate them as QoS and security ACL packets.

Switch:1>enable
Switch:1#show filter acl statistics all

================================================================================
                          Acl Global Statistics Table
================================================================================
Acl Id  Acl Name    Acl Type  Acl Sec    Acl Sec    Acl QOS    Acl QOS
                              Packets    Bytes      Packets    Bytes
--------------------------------------------------------------------------------
1       ACL-1       inVlan    0          0          0          0
2       ACL-2       inVlan    0          0          0          0

Displayed 2 of 2 entries


================================================================================
                          Acl Default Statistics Table
================================================================================
Acl Id  Acl Name    Acl Type  Acl Sec    Acl Sec    Acl QOS    Acl QOS
                              Packets    Bytes      Packets    Bytes
--------------------------------------------------------------------------------
1       ACL-1       inVlan    0          0          0          0
2       ACL-2       inVlan    0          0          0          0

Displayed 2 of 2 entries


--More-- (q = quit)

Switch:1#show filter acl statistics default

================================================================================
                          Acl Default Statistics Table
================================================================================
Acl Id  Acl Name    Acl Type  Acl Sec    Acl Sec    Acl QOS    Acl QOS
                              Packets    Bytes      Packets    Bytes
--------------------------------------------------------------------------------
1       ACL-1       inVlan    0          0          0          0
2       ACL-2       inVlan    0          0          0          0

Displayed 2 of 2 entries

Switch:1#show filter acl statistics global 2

===============================================================================
                          Acl Global Statistics Table
===============================================================================
Acl Id  Acl Name    Acl Type  Acl Sec    Acl Sec    Acl QOS    Acl QOS
                              Packets    Bytes      Packets    Bytes
-------------------------------------------------------------------------------
2       ACL-2       inVlan    0          0          0          0

Displayed 1 of 1 entries

Variable Definitions

Use the data in the following table to use the show filter acl statistics command.


Variable	Value
`<acl-id>`	Specifies the ACL ID. Use the CLI Help to see the available range for the switch.
`<ace-id>`	Specifies the ACE ID. Different hardware platforms support different ACE ID ranges. Use the CLI Help to see the available range for the switch.