Displaying remote VTEP information

Use the following procedure to display information about the remote VTEP.

Procedure

Enter Privileged EXEC mode:

enable
Display information about all of the remote VTEPs or use the option to specify a particular VTEP:

show vtep remote [<1–500>]

Example

Switch:1# show vtep remote 
==========================================================================
                              Remote VTEP Info 
==========================================================================
ID    NAME         VTEP         L3_VTEP_NEXT_HOP_INFO
                   DEST-IP      PORT/MLT      VLAN      VRF
-----------------------------------------------------------------------------
1     vtep-1       198.51.100.6    Mlt78      3851      GlobalRouter 
56    vtep-56      198.51.100.22   Mlt130     3855      underlay-vxlan 

-------------------------------------------------
  2 out of 2 Total Num of remote vteps
-------------------------------------------------