Modify the IPv6 RSMLT Local Information
Edit the existing RSMLT configuration for the local node in the cluster.
Procedure
- In the navigation pane, expand ConfigurationIPv6.
- Select RSMLT.
- Select the Local tab.
- Select a cell to change the value.
- Select Apply.
Local field descriptions
Use the data in the following table to use the Local tab.
|
Name |
Description |
|---|---|
|
IfIndex |
Shows the route SMLT operation index. |
|
Ipv6Addr |
Configures the IPv6 address of the RSMLT interface. |
|
Ipv6PrefixLength |
Configures the IPv6 prefix length. |
|
Enable |
Enables or disables RSMLT. The default is disabled. |
|
HoldDownTimer |
Defines how long the recovering/rebooting switch remains in a non-Layer 3 forwarding mode for the peer router MAC address. The default is 60. |
|
HoldUpTimer |
Defines how long the RSMLT switch maintains forwarding for its peer. The value is a range from 0 to 3600 seconds or 9999. 9999 means infinity. The default is 1800. |
|
OperStatus |
Displays the RSMLT operating status as either up or down. |
|
SmltId |
Specifies the ID range for the SMLT. |
|
VlanId |
Configures the VLAN ID. |
|
MacAddr |
Configures the MAC address of the VLAN. |
|
VrfId |
Indicates the virtual router ID to which the local RSMLT instance belongs. |
|
VrfName |
Indicates the virtual router name to which the local RSMLT instance belongs. |