Displaying Bridging Statistics for Specific Ports
About this task
Display individual bridging statistics for specific ports to manage network performance.
Note
This command is not available on all hardware platforms.
Procedure
Example
================================================================================
Port Stats Bridge
================================================================================
PORT IN_FRAME IN_FRAME IN_FRAME OUT_FRAME IN_FRAME OUT_FRAME IN_DISCARD
NUM UNICAST MULTICAST BROADCAST xSTP BPDU xSTP BPDU
--------------------------------------------------------------------------------
1/1 179325 0 0 119310 179325 0 0
1/2 187951 26078 42 689486 179324 0 25617
1/3 0 0 0 0 0 0 0
1/4 0 0 0 0 0 0 0
1/5 0 0 0 0 0 0 0
1/6 394 0 0 948942 360 0 0
1/7 4689 0 0 863403 360 0 0
1/8 4369 3206 116 958752 360 0 3995
1/9 0 0 0 0 0 0 0
1/10 0 0 0 0 0 0 0
1/11 0 0 0 0 0 0 0
1/12 0 0 0 0 0 0 0
1/13 179325 0 0 42040 179325 0 0
1/14 187864 0 0 50437 179324 0 0
1/15 0 0 0 0 0 0 0
1/16 0 0 0 0 0 0 0
--More-- (q = quit)
Variable Definitions
Use the data in the following table to use the show interfaces GigabitEthernet statistics bridging command.
|
Variable |
Value |
|---|---|
|
{slot/port[/sub-port][-slot/port[/sub-port]][,...]} |
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port. |