Viewing Port Routing Statistics

About this task

View port routing statistics to manage network performance.

Note

This command is not available on all hardware platforms.

Procedure

View port routing statistics:

show routing statistics interface [gigabitethernet] [{slot/port[-slot/port][,...]}]

Example

Switch:1#show routing statistics interface gigabitethernet 1/7-1/9

================================================================================
                               Port Stats Routing
================================================================================
PORT     IN_FRAME   IN_FRAME   IN         OUT_FRAME  OUT_FRAME
NUM      UNICAST    MULTICAST  DISCARD    UNICAST    MULTICAST
--------------------------------------------------------------------------------
1/7      1386       0          0          1344       0
1/8      1302       0          0          1344       0
1/9      0          0          0          0          0

Variable Definitions

Use the data in the following table to use the show routing statistics interface command.


Variable	Value
gigabitethernet	Specifies the interface type.
{slot/port[/sub-port][-slot/port[/sub-port]][,...]}	Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.