mode

Sets the crypto map tunnel mode

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

mode [transport|tunnel]

Parameters

mode [transport|tunnel]


mode [transport\|tunnel]	Sets the mode of the tunnel for this crypto map transport – Initiates transport mode tunnel – Initiates tunnel mode (default setting)

Example

nx9500-6C8809(config-profile-default-ap8533-cryptomap-map1#1)#mode transport

nx9500-6C8809(config-profile-default-ap8533-cryptomap-map1#1)#show context
 crypto map map1 1 ipsec-manual
  mode transport
nx9500-6C8809(config-profile-default-ap8533-cryptomap-map1#1)#