no (ipv6-acl)

Removes a deny or permit rule from this IPv6 ACL Policy

Supported in the following platforms:

• Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

no [deny|permit]

no [deny|permit] [icmpv6|ipv6|proto|tcp|udp] <RULE-PARAMETERS> {(rule-description <LINE>)}

Parameters

no <PARAMETERS>

Examples

The following example shows the ACL ‘test‘ settings before the ‘no‘ commands is executed:

nx9500-6C8809(config-ipv6-acl-test)#show context
ipv6 access-list test
 deny icmpv6 any any type eq destination-unreachable code eq router-renumbering-command log rule-precedence 1
 permit proto gre any any log rule-precedence 2
nx9500-6C8809(config-ipv6-acl-test)#

nx9500-6C8809(config-ipv6-acl-test)#no deny icmpv6 any any type eq 1 log rule-precedence 1

nx9500-6C8809(config-ipv6-acl-test)#show context
ipv6 access-list test
 permit proto gre any any log rule-precedence 2
nx9500-6C8809(config-ipv6-acl-test)#