preferred (meshpoint-device-config)

Configures the preferred path parameters for this meshpoint device

Supported on the following platforms:

Access Points — AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533

Syntax

preferred [neighbor <MAC>|root <MAC>|interface [2.4GHz|4.9GHz|5GHz]]

Parameters

preferred [neighbor <MAC>|root <MAC>|interface [2.4GHz|4.9GHz|5GHz]]


preferred	Configures the preferred path parameters
neighbor <MAC>	Adds the MAC address of a neighbor meshpoint as a preferred neighbor
root <MAC>	Adds the MAC address of a root meshpoint as a preferred root
interface [2.4GHz\|4.9GHz\|5GHz]	Sets the preferred interface

Examples

nx9500-6C8809(config-profile-AP8533TestProfile-meshpoint-test)#preferred neighbor 11-22-33-44-55-66

nx9500-6C8809(config-profile-AP8533TestProfile-meshpoint-test)#preferred root 22-33-44-55-66-77

nx9500-6C8809(config-profile-AP8533TestProfile-meshpoint-test)#preferred interface 5GHz

nx9500-6C8809(config-profile-AP8533TestProfile-meshpoint-test)#show context
 meshpoint-device test
  name test
  preferred root 22-33-44-55-66-77
  preferred neighbor 11-22-33-44-55-66
  preferred interface 5GHz
  monitor critical-resource action no-root
nx9500-6C8809(config-profile-AP8533TestProfile-meshpoint-test)#

Related Commands


no (meshpoint-device-config)	Removes the configuration of preferred paths for this meshpoint device