retry-interval

Configures the interval, in seconds, between two successive attempts at retransmitting a L2TPv3 signaling message

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

retry-interval <1-250>

Parameters

retry-interval <1-250>


retry-interval <1-250>	Configures the interval, in seconds, between two successive retransmission attempts <1-250> – Specify a value from 1 - 250 seconds (default is 5 seconds).

Examples

nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#retry-interval 30

nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#show context
l2tpv3 policy L2TPV3Policy1
 hello-interval 200
 retry-attempts 10
 retry-interval 30
 cookie-size 8
 reconnect-interval 100
 reconnect-attempts 8
nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#

Related Commands


no	Resets the retry interval to default (5 seconds)