no (meshpoint-device-config)

Negates the commands for a meshpoint device or resets values to default

Supported on the following platforms:

Syntax

no [acs|exclude|hysteresis|monitor|path-method|preferred|root|root-select]
no acs [channel-hold-time|channel-switch-delta|channel-width|ocs-duration|
ocs-frequency|path-min|path-threshold|preferred-interface-tolerance-period|
preferred-radio-interface|priority-meshpoint|sample-count|snr-delta|
signal-threshold|tolerance-period] [2.4GHZ|5GHz]
no exclude wired-peer mint-level-1
no hysteresis [min-threshold|period|root-sel-snr-delta|snr-delta]
no monitor [critical-resource|primary-port-link-loss]
no [path-method|root {select-method}]
no root-select cost-root
no preferred [interface|root|neighbor]

Parameters

no <PARAMETERS>
no <PARAMETERS> Removes or reverts this meshpoint device settings to default based on the parameters passed

Examples

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#show context
 meshpoint-device test
  name test
  root
  preferred root 22-33-44-55-66-77
  preferred neighbor 11-22-33-44-55-66
  preferred interface 5GHz
  monitor critical-resource action no-root
nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#

nx9500-6C8809(config-profile-testAP8432-meshpoint-test))#no monitor critical-resource

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#no preferred neighbor

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#no root

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#no preferred interface

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#show context
 meshpoint-device test
  name test
  no root
  preferred root 22-33-44-55-66-77
nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#
9036514-01 Rev AA