enable (iot-device-type-imagotag-policy)

Enables the ESL communicator. When applied to the profile or self of the WiNG AP, the policy enables the ESL communicator connected to the AP's USB port.

Note

The AP's LED turns to Amber when the ESL communicator is enabled. If it does not turn to Amber, re-check the policy configuration and ensure the AP is using 802.3at power.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/e, AP8432
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

enable

Parameters

None

Examples

nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#enable

nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#show context
 iot-device-type-imagotag-policy ImagoTagPolicy
  enable
  channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#

Related Commands


no (iot-device-type-imagotag-policy)	Disables the ESL communicator