root-select (meshpoint-device-config)
Configures this mesh-point device as
the cost. root
Supported on the following
platforms:
- Access Points — AP7522, AP7532,
AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Syntax
root-select cost-root
Parameters
root-select cost-root
| root-select cost-root |
Configures this meshpoint device as the cost root. This is necessary for
dynamic root selection process. Select this option to set the meshpoint as
the cost root for meshpoint root selection. This setting is disabled by
default.
|
Examples
ap8432-070235(config-device-74-67-F7-07-02-35-meshpoint-test)#root-select cost-root
ap8432-070235(config-device-74-67-F7-07-02-35-meshpoint-test)#show context
meshpoint-device test
root select-method auto-mint
root-select cost-root
ap8432-070235(config-device-74-67-F7-07-02-35-meshpoint-test)#
