Wireless Controller, Service Platform and Access Point CLI Reference Guide

Configures raw DHCP options. The DHCP option has to be configured in the DHCP server policy. The options configured in the DHCP pool/DHCP server policy can also be used in static bindings.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

option <OPTION-NAME> <0-250> [ascii|hexstring|ip]

Parameters

option <OPTION-NAME> <0-250> [ascii|hexstring|ip]


<OPTION-NAME>	Configures the option name
<0-250>	Configures the DHCP option code from 0 - 250
ascii	Configures the DHCP option as an ASCII string
hexstring	Configures the DHCP option as a hexadecimal string
ip	Configures the DHCP option as an IP address

Usage Guidelines

Defines non-standard DHCP option codes (0-254)

Note

An option name in ASCII format accepts a backslash (\) as an input, but is not displayed in the output. Use the show > runnig > config command to view the output. Use a double backslash to represent a single backslash.

Examples

nx9500-6C8809(config-dhcp-policy-test)#option option1 200 ascii

nx9500-6C8809(config-dhcp-policy-test)#show context
dhcp-server-policy test
 option option1 200 ascii
nx9500-6C8809(config-dhcp-policy-test)#

Related Commands


no (dhcpv4-server-policy-config)	Removes DHCP server options

option (dhcpv4-server-policy-config)