payload-size
(iot-device-type-imagotag-policy)
Configures the maximum size of the
payload in packets exchanged between ESL communicator and tags
Supported in the following
platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e,
AP505i, AP510i/e, AP560i/e, AP8432
- Service Platforms — NX5500,
NX7500, NX9500, NX9600, VX9000
Syntax
payload-size <1-32>
Parameters
payload-size <1-32>
| payload-size <1-32> |
Configures the packet‘s payload size
- <1-32> – Specify the value from 1 - 32 bytes. The
default setting is 32 bytes.
Note: SES-Imagotags recommends NOT to change the default
setting.
|
Examples
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#payload-size 25
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#show context
iot-device-type-imagotag-policy ImagoTagPolicy
enable
output-power Level-B
payload-size 25
fcc-enable
channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#
