Specifies the speed of a FastEthernet (10/100) or GigabitEthernet (10/100/1000) port. This is the speed at which the port can receive and transmit the data.
speed [10|100|1000|auto]
speed [10|100|1000|auto]
| 10 | Forces 10 Mbps operation |
| 100 | Forces 100 Mbps operation |
| 1000 | Forces 1000 Mbps operation |
| auto | Port automatically detects its operational speed based on the port at the other end of the link. Select this option to enable the port to automatically exchange information about data transmission speed and duplex capabilities. Auto negotiation is helpful when in an environment where different devices are connected and disconnected on a regular basis. |
Set the interface speed to auto detect and use the fastest speed available. Speed detection is based on connected network hardware.
nx9500-6C8809(config-profile-testnx5500-if-ge1)#speed 10 nx9500-6C8809(config-profile-testnx5500-if-ge1)#show context interface ge1 description "This is GigabitEthernet interface for Royal King" speed 10 duplex full spanning-tree bpduguard enable spanning-tree bpdufilter disable spanning-tree force-version 1 spanning-tree guard root spanning-tree mst 2 port-priority 10 dot1x supplicant username Bob password 0 test@123 ip dhcp trust ip arp header-mismatch-validation qos trust dscp qos trust 802.1p channel-group 1 nx9500-6C8809(config-profile-testnx5500-if-ge1)#
| no | Resets speed to default (auto) |