Wireless Controller, Service Platform and Access Point CLI Reference Guide

Configures the RF Domain‘s geographic time zone. By default all WiNG devices are shipped with the time zone and time format set to UTC (Universal Time Coordinated) and 24-hour clock respectively. If the time zone is not reset, all devices within the RF Domain will display time relative to the UTC - Greenwich Time. Resetting the time zone is recommended, especially for RF Domains deployed across different geographical locations. The time zone can either be set on a specific device or on an RF Domain. When configured as RF Domain setting, it applies to all devices within the domain. For more information on configuring the time zone on a device, see timezone (device config mode).

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

timezone <TIMEZONE>

Parameters

timezone <TIMEZONE>


time <TIMEZONE>	Specify the RF Domain‘s time zone. The configured time zone will apply to all devices within the selected RF Domain.

Examples

nx9500-6C8809(config-rf-domain-default)#timezone America/Los_Angeles

nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
 contact Bob+14082778691
 timezone America/Los_Angeles
 stats update-interval 200
 country-code us
 sensor-server 2 ip 172.16.10.3
 override-smartrf channel-list 2.4GHz 1,2,3 
 override-wlan test vlan-pool 2 limit 20
 layout area Ecospace floor Floor1 map-location www.firstfloor.com units meters
nx9500-6C8809(config-rf-domain-default)#

Use [TAB] to view the built-in timezones.

nx9500-6C8809(config-rf-domain-test)#timezone <TAB>
Africa/     Asia/       Atlantic/   Australia/  CET         CST6CDT
EET         EST5EDT     Etc/        Europe/     MST7MDT     Pacific/
PST8PDT     US/         America/
nx9500-6C8809(config-rf-domain-test)#

Each of these time zones are further differentiated into sub time zones. For example, as shown in the following example:

nx9500-6C8809(config-rf-domain-test)#timezone Africa/
Africa/Cairo         Africa/Casablanca    Africa/Harare
Africa/Johannesburg  Africa/Lagos         Africa/Nairobi
nx9500-6C8809(config-rf-domain-test)#

Related Commands


no (rf-domain-config-mode)	Removes a RF Domain's time zone