location-tenantid

Device Config Commands

Configures the ExtremeLocation Tenant‘s account number. ExtremeLocation Tenants, at the time of registration, are communicated (via, email) an account number uniquely identifying the Tenant. Configure this account number on the AP. When configured, data (802.11 frames and/or BLE beacons) pushed to the ExtremeLocation server, include the Tenant's account number along with the reporting AP's MAC address. Including the Tenant account number reinforces the Tenant's identity.

For information on enabling data forwarding to the ExtremeLocation server, see location-server.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

location-tenantid <WORD>

Parameters

location-tenantid <WORD>


location-tenantid <WORD>	Configures the ExtremeLocation Tenant‘s account number <WORD> – Specify the account number.

Examples

nx9500-6C8809(config-device-94-9B-2C-13-40-38)#location-tenantid 123456

nx9500-6C8809(config-device-94-9B-2C-13-40-38)#show context
ap505 94-9B-2C-13-40-38
 use profile default-ap505
 use rf-domain default
 hostname ap505-134038
 no staging-config-learnt
 location-server 1 ip test port 200
 location-tenantid 123456
nx9500-6C8809(config-device-94-9B-2C-13-40-38)#

Related Commands


no	Removes the ExtremeLocation Tenant‘s account number configuration