iot-device-type-imagotag
Displays the configuration of ESL communicator on a specified AP or on all APs within
an RF Domain.
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP505i,
AP510i/e, AP560i/e, AP8432
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Syntax
show iot-device-type-imagotag status {on <DEVICE-OR-DOMAIN-NAME>}
Parameters
show iot-device-type-imagotag status {on <DEVICE-OR-DOMAIN-NAME>}
iot-device-type-imagotag status |
Displays Imagotag ESL communicator configuration at device or domain
level |
on <DEVICE-NAME> |
Optional. Displays configuration on a specified device or RF Domain |
Example
ap8432-9A5BD8#show iot-device-type-imagotag status on default
---------------------------------------------------------------------------------------------------
Imagotag Policy Dongle-Status AP-ID Channel Window Payload Max Output SSL FCC-Mode ACS
Size Size Power
---------------------------------------------------------------------------------------------------
Enabled Disconnected 25982 7 14 32 A Enabled Enabled Enabled
Enabled Connected 45290 10 14 32 A Enabled Enabled Enabled
----------------------------------------------------------------------------------------------------
Total devices: 2
ap8432-9A5BD8#
nx9500-6C8809#show iot-device-type-imagotag status on default on ap8432-9A5BD8
---------------------------------------------------------------------------------------------------
Imagotag Policy Dongle-Status AP-ID Channel Window Payload Max Output SSL FCC-Mode ACS
Size Size Power
---------------------------------------------------------------------------------------------------
Enabled Connected 45290 10 14 32 A Enabled Enabled Enabled
----------------------------------------------------------------------------------------------------
Total devices: 2
ap8432-9A5BD8#