offline-duration

Sets the duration, in minutes, for which a device remains unadopted before it generates offline event

This command is also supported on the device configuration mode.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

offline-duration <5-43200>

Parameters

offline-duration <5-43200>


offline-duration <5-43200>	Specify a value from 5 - 43200 minutes. The default is 10 minutes.

Example

nx9500-6C8809(config-profile-Test8533)#offline-duration 200

nx9500-6C8809(config-profile-Test8533)#show context
profile ap8533 Test8533
 no autoinstall configuration
 no autoinstall firmware
 crypto ikev1 policy ikev1-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 ................................................................
 interface wwan1
 interface pppoe1
 use firewall-policy default
 service pm sys-restart
 router ospf
 offline-duration 200
nx9500-6C8809(config-profile-Test8533)#

Related Commands


no	Resets the offline-duration to default (10 minutes)