Wireless Controller, Service Platform and Access Point CLI Reference Guide

Bonjour is Apple‘s zero-configuration networking (Zeroconf) implementation. Bonjour enables automatic IP address assignment, name to address resolution, and service discovery without having to configure a DHCP server, DNS server, and Directory server. When configured and applied on a WLAN, the Bonjour Gateway Discovery policy queries for and locates Bonjour devices (printers, computers, file-sharing servers, etc.) and services these computers provide over a local network. Bonjour works only within a single broadcast domain. However, with a special DNS configuration, it can be extended to find services across broadcast domains.

Use this command to configure a Bonjour GW Discovery policy. The policy defines a list of services clients can discover across subnets. A maximum of 8 (eight) policies can be created on access points, wireless controllers, or service platforms.

When configured and applied, this feature enables Bonjour services on local and tunneled VLANs.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

bonjour-gw-discovery-policy <POLICY-NAME>

Parameters

bonjour-gw-discovery-policy <POLICY-NAME>


<POLICY-NAME>	Specify the Bonjour GW Discovery policy name. If the policy does not exist, it is created. In the Bonjour GW Discovery policy configuration mode, use the allow-service keyword to configure the services that the Bonjour gateway is allowed to discover. A maximum of 16 (sixteen) service rules can be created. Optionally, you can restrict this facility for users on specific VLANs. To do so, specify the VLAN IDs. Execute the bonjour-gw-forwarding-policy command to enable forwarding of Bonjour service responses across VLANs. To associate a Bonjour GW Discovery policy with a WLAN, in the WLAN configuration mode, execute the following command: use > bonjour-gw-discovery-policy > <POLICY-NAME>. For more information, see use (wlan-config-mode). To associate a Bonjour GW Discovery policy with a VLAN, in the interface VLAN configuration mode, execute the following command: use > bonjour-gw-discovery-policy > <POLICY-NAME>. For more information, see use. To associate a Bonjour GW Discovery policy with a user role, in the role-policy - user-role - configuration mode, execute the following command: use > bonjour-gw-discovery-policy > <POLICY-NAME>. For more information, see use.

Examples

nx9500-6C8809(config)#bonjour-gw-discovery-policy TestPolicy
nx9500-6C8809(config-bonjour-gw-discovery-policy-TestPolicy)#?
 commands:
  allow-service  Allow Bonjour Service on local or tunneled vlan,Optionally
                 VLAN IDs can be given so service will be discovered for those
                 vlan only
  no             Negate a command or set its defaults

  clrscr         Clears the display screen
  commit         Commit all changes made in this session
  do             Run commands from Exec mode
  end            End current mode and change to EXEC mode
  exit           End current mode and down to previous mode
  help           Description of the interactive help system
  revert         Revert changes
  service        Service Commands
  show           Show running system information
  write          Write running configuration to memory or terminal

nx9500-6C8809(config-bonjour-gw-discovery-policy-TestPolicy)#sIsEtU_@3691

Related Commands


no	Removes an existing Bonjour GW Discovery policy