show (other-cmp-related-commands)
Displays current status of CMP requests in progress. This
command also displays trustpoint details (CMP and non-CMP trustpoints).
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
show crypto [cmp|pki]
show crypto cmp request status {on <DEVICE-NAME>}
show crypto pki trustpoints {<TRUSTPOINT-NAME>|all} {on <DEVICE-NAME>}
Parameters
show crypto cmp request status {on <DEVICE-NAME>}
| show crypto cmp request {on
<DEVICE-NAME>} |
Displays the current status of all on-going CMP
requests
- on <DEVICE-NAME> – Optional. Optionally specify the name of the
AP, wireless controller, or service platform to view CMP request
status on a specified device.
|
show crypto pki trustpoints {<TRUSTPOINT-NAME>|all} {on <DEVICE-NAME>}
| show pki trustpoints {<TRUSTPOINT-NAME>|all}
on <DEVICE-NAME> |
Displays all trustpoints including CMP generated
trustpoints
- <TRUSTPOINT-NAME> – Optional. Specify a trustpoint name. Displays
details of the trustpoint identified by the <TRUSTPOINT-NAME>
parameter.
- all – Optional. Displays details of all configured trustpoints
- on <DEVICE-NAME> – Optional. Specify the name of the AP,
wireless controller, or service platform to view trustpoints
configured on a specified device.
|
Examples
ap505-D8273A#show crypto pki trustpoints
---------------------------------------------------------------------------------------
TRUSTPOINT KEY NAME VALID UNTIL
---------------------------------------------------------------------------------------
cmp-test cmp-test-key Fri May 9 09:44:22 2014 GMT
default-trustpoint default_rsa_key Fri Dec 30 00:00:40 2022 GMT
---------------------------------------------------------------------------------------
ap505-D8273A#
ap505-D8273A(config)#show crypto cmp request status
CMP Request Status: cmp-complete
ap505-D8273A#
