area

Sets the system‘s area of location (the physical area of deployment)

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

area <WORD>

Parameters

area <WORD>


area <WORD>	Sets the system‘s area of location <WORD> – Specify the area name (should not exceed 64 characters).

Example

nx9500-6C8809(config-profile-default-ap505)#area Ecospace

nx9500-6C8809(config-profile-default-ap505)#show context
profile ap505 default-ap505
 bridge vlan 1
  ip igmp snooping
  ip igmp snooping querier
 area Ecospace
 autoinstall configuration
 autoinstall firmware
 crypto ikev1 policy ikev1-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ikev2 policy ikev2-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure
 interface me1
 interface ge1
--More--
nx9500-6C8809(config-profile-default-ap505)#

Related Commands


no	Resets the configured area name