server-preference (dhcpv6-server-policy-config)
Configures this DHCPv6 server‘s preference value. When
configured, the server preference value is included in the DHCPv6 server‘s replies to IPv6
clients.
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
server-preference <0-255>
Parameters
server-preference <0-255>one
| server-preference <0-255> |
Configures this DHCP server‘s preference value
- <0-255> – Specify a value from 0 - 255.
|
Examples
nx9500-6C8809(config-dhcpv6-server-policy-test)#server-preference 1
nx9500-6C8809(config-dhcpv6-server-policy-test)#show context
dhcpv6-server-policy test
option DHCPServerOption1 10 ascii 50
dhcpv6-pool DHCPv6Pool1
network 2002::/64
domain-name TechPubs
sip domain-name TechPubsSIP
dns-server 2002::1
server-preference 1
restrict-vendor-options
nx9500-6C8809(config-dhcpv6-server-policy-test)#
