rf-domain-manager

Configures the RF Domain manager election criteria

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

rf-domain-manager [capable|priority <1-255>]

Parameters

rf-domain-manager [capable|priority <1-255>]


rf-domain-manager	Configures the RF Domain manager election criteria
capable	Enables devices using this profile capable of being elected as the RF Domain manager. The RF Domain manager stores and provisions configuration and firmware images for other members of the RF Domain. It also updates state changes, if any, to RF Domain members. This option is enabled by default.
priority <1-255>	Assigns a priority value for devices using this profile in the RF Domain manager election process. The higher the number set, higher is the device‘s priority in the RF Domain manager election process. <1-255> – Select a priority value from 1 - 255.

Example

NOC-NX9500(config-profile-testNX9000)#rf-domain-manager capable

NOC-NX9500(config-profile-testNX9000)#rf-domain-manager capable

NOC-NX9500(config-profile-testNX9000)#show context include-factory | include rf-
domain-manager
 rf-domain-manager capable
 rf-domain-manager priority 1
NOC-NX9500(config-profile-testNX9000)#

Related Commands


no	Disables or reverts settings to their default