no (nac-list-config-commands)

Cancels an exclude or include NAC list rule

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

no [exclude|include]

no [exclude|include] <START-MAC> [<END-MAC> precedence <1-1000>|precedence <1-1000>]

Parameters

no <PARAMETERS>


no <PARAMETERS>	Removes or reverts this NAC list‘s settings based on the parameters passed

Examples

The following example shows the NAC list ‘test‘ settings before the ‘no‘ command is executed:

nx9500-6C8809(config-nac-list-test)#show context
nac-list test
 exclude 00-04-96-B0-BA-2A 00-04-96-B0-BA-2A precedence 1
 include 00-15-70-38-06-49 00-15-70-38-06-49 precedence 2
nx9500-6C8809(config-nac-list-test)#

nx9500-6C8809(config-nac-list-test)#no exclude 00-40-96-B0-BA-2A precedence 1

The following example shows the NAC list ‘test‘ settings after the ‘no‘ command is executed:

nx9500-6C8809(config-nac-list-test)#show context
nac-list test
 include 00-15-70-38-06-49 00-15-70-38-06-49 precedence 2
nx9500-6C8809(config-nac-list-test)#