mtu

Configures the MTU size for this tunnel. This value determines the packet size transmitted over this tunnel.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

mtu <128-1460>

Parameters

mtu <128-1460>


mtu <128-1460>	Configures the MTU size for this tunnel <128-1460> – Specify a value from 128 - 1460 bytes (default is 1460 bytes).

Examples

nx9500-6C8809(config-profile default-nx5500-l2tpv3-tunnel-Tunnel1)#mtu 1280

nx9500-6C8809(config-profile default-nx5500-l2tpv3-tunnel-Tunnel1)#show context
 l2tpv3 tunnel Tunnel1
  local-ip-address 172.16.10.2
  mtu 1280
  hostname TunnelHost1
nx9500-6C8809(config-profile default-nx5500-l2tpv3-tunnel-Tunnel1)#

Related Commands


no	Resets the MTU size for this manual session to default (1460 bytes)