Wireless Controller, Service Platform and Access Point CLI Reference Guide

Displays dot1x information on interfaces. Dot1x (or 802.1x) is an IEEE standard for network authentication. Devices supporting dot1x allow the automatic provision and connection to the wireless network without launching a Web browser at login. When within range of a dot1x network, a device automatically connects and authenticates without needing to manually login.

However, dot1x-enabled devices can be configured either as:

supplicants only – Devices seeking network access
authenticators only – Devices authenticating the supplicants, or
supplicants as well authenticators

Note

Dot.1x supplicant configuration is supported on the following platforms:

Access Points – AP410, AP460, AP505, AP510, AP560, AP7502, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms – NX5500, NX7500

Note

Dot.1x authenticator configuration is supported on the following platforms:

Service Platforms – NX5500, NX7500

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

show dot1x {all|interface|on}

show dot1x {all {on <DEVICE-NAME>}|on <DEVICE-NAME>}

show dot1x {interface [<INTERFACE-NAME>|ge <1-4>|port-channel <1-2>} {on <DEVICE-NAME>}

Parameters

show dot1x {all {on <DEVICE-NAME>}|on <DEVICE-NAME>}


dot1x all {on <DEVICE-NAME>}	Optional. Displays dot1x information for all interfaces on <DEVICE-NAME> – Optional. Displays dot1x information for all interfaces on a specified device <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
dot1x {on <DEVICE-NAME>}	Optional. Displays dot1x information for interfaces on a specified device <DEVICE-NAME> – Specify the name of AP, wireless controller, or service platform.

show dot1x {interface [<INTERFACE-NAME>|ge <1-4>|port-channel <1-2>]} {on <DEVICE-NAME>}


dot1x interface	Optional. Displays dot1x information for a specified interface or interface type
<INTERFACE-NAME>	Displays dot1x information for the layer 2 (Ethernet port) interface specified by the <INTERFACE-NAME> parameter
ge <1-4>	Displays dot1x for a specified GigabitEthernet interface <1-4> – Select the interface index from 1 - 4.
port-channel <1-2>	Displays dot1x for a specified port channel interface <1-2> – Select the interface index from 1 - 2.
on <DEVICE-NAME>	The following keywords are common to all of the above parameters: on <DEVICE-NAME> – Optional. Displays dot1x interface information on a specified device <DEVICE-NAME> – Specify the name of AP, wireless controller, or service platform.

Examples

ap8432-070235>show dot1x all
802.1X information
------------------------------
  SysAuthControl : disabled
  Guest-Vlan     : disabled
  AAA-Policy     : none
  Holdtime       : 60

802.1X information for interface GE1
--------------------------------------
Supplicant MAC N/A
  Auth SM State : FORCE AUTHORIZED
  Bend SM State : REQUEST
  Port Status   : AUTHORIZED
  Host Mode     : SINGLE
  Auth Vlan     : None
  Guest Vlan    : None

802.1X information for interface GE2
--------------------------------------
Supplicant MAC N/A
  Auth SM State : FORCE AUTHORIZED
  Bend SM State : REQUEST
  Port Status   : AUTHORIZED
  Host Mode     : SINGLE
  Auth Vlan     : None
  Guest Vlan    : None

ap8432-070235>