Configures a firewall policy. This policy defines a set of rules for managing network traffic and prevents unauthorized access to the network behind the firewall.
firewall-policy <FIREWALL-POLICY-NAME>
firewall-policy <FIREWALL-POLICY-NAME>
|
<FIREWALL-POLICY-NAME> |
Specify the firewall policy name. If a firewall policy, with the specified name, does not exist, it is created. |
nx9500-6C8809(config)#firewall-policy test nx9500-6C8809(config-fw-policy-test)#? Firewall policy Mode commands: acl-logging Log on flow creating traffic alg Enable ALG clamp Clamp value dhcp-offer-convert Enable conversion of broadcast dhcp offers to unicast dns-snoop DNS Snooping firewall Wireless firewall flow Firewall flow ip Internet Protocol (IP) ip-mac Action based on ip-mac table ipv6 Internet Protocol version 6 (IPv6) ipv6-mac Action based on ipv6-mac table logging Firewall enhanced logging no Negate a command or set its defaults proxy-arp Enable generation of ARP responses on behalf of another device proxy-nd Enable generation of ND responses (for IPv6) on behalf of another device stateful-packet-inspection-l2 Enable stateful packet inspection in layer2 firewall storm-control Storm-control virtual-defragmentation Enable virtual defragmentation for IPv4 packets (recommended for proper functioning of firewall) clrscr Clears the display screen commit Commit all changes made in this session do Run commands from Exec mode end End current mode and change to EXEC mode exit End current mode and down to previous mode help Description of the interactive help system revert Revert changes service Service Commands show Show running system information write Write running configuration to memory or terminal nx9500-6C8809(config-fw-policy-test)#
| no |
Removes an existing firewall policy |
