permit

A whitelist is a list of host names and IP addresses permitted access to the network or captive portal. This command adds a host or destination IP address to the DNS whitelist.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

permit <IPv4/IPv6/HOSTNAME> {suffix}

Parameters

permit <IPv4/IPv6/HOSTNAME> {suffix}


<IPv4/IPv6/HOSTNAME>	Adds a device to the DNS whitelist <IPv4/IPv6/HOSTNAME> – Provide a hostname or numerical IPv4 or IPv6 address for each destination IP address or host included in the whitelist. Note: A maximum of 256 entries can be made.
suffix	Optional. Matches any hostname including the specified name as suffix

Examples

nx9500-6C8809(config-dns-whitelist-test)#permit example_company.com suffix

nx9500-6C8809(config-dns-whitelist-test)#show context
dns-whitelist test
permit example_company.com suffix
nx9500-6C8809(config-dns-whitelist-test)#

Related Commands


no	Removes a DNS whitelist entry